
极速飞艇在线走势图
极速飞艇开奖结果直播
极速飞艇计划软件
极速飞艇分析
极速飞艇开彩结果历史
极速飞艇官方开奖
极速飞艇人工计划软件
极速飞艇最准的计划
极速飞艇开奖平台
The composite molding process inherently requires the use of materials that can withstand high temperatures and reduce mistakes in the finished composite part, especially when it comes to the larger components required for wind energy and aerospace markets. Our high temperature, non-stick products protect and prolong the life of expensive tooling and ensure quality output leaving no residue. From PTFE molding tapes to polyimide and PET flash masking tapes, finished composite parts are sure to benefit from quality products by having clean lines and fewer defects.
极速飞艇走势图
极速飞艇app
Available for a wide range of accessory applications such as masking for stripping and painting, lining and seaming of miscellaneous cargo and bulkhead compartments, and general-purpose sliding applications in cargo pits, our full solution for composite molding is designed with process and protection in mind.
极速飞艇怎么玩
Backing Material | Adhesive | .025 mm | .050 mm | .152 mm | Short Term Temp. Rating (1-5 hours)°F (°C) |
Product Features |
Polyester (PET) | Rubber | M851 Green |
M852 Green |
M855 Green |
400°F (200°C) |
Non-silicone flash and hold down tape |
Polyester (PET) | Rubber | M783 Pink |
400°F (200°C) |
High adhesion, non-silicone flash and hold down tape | ||
Polyester (PET) | Silicone | M824 Blue |
M832 Blue |
M895 Blue |
400°F (200°C) |
Economy flash tape and hold down tape |
Polyester (PET) | Silicone | M887 Emerald | 400°F (200°C) |
Economy flash tape & hold down tape – alternative color |
Back Material | Adhesive | .075 mm | .127 mm | .152 mm | .250 mm | Short Term Temp. Rating (1-5 hours)°F (°C) | Product Features |
PTFE Glass Cloth Laminate |
Silicone | SGB6-4 | SGC6-6 | SGB6-10 | 600°F (310°C) |
Premium non-stick properties, long life and uniform textured surface finish |
|
PTFE Glass Cloth |
Silicone | SG16-05 | 600°F (310°C) |
High performance grade with smooth surface finish |
|||
PTFE Glass Cloth |
Silicone | 8015-3 | 8015-5 | 8015-10 | 600°F (310°C) |
Widest available product in the market at 48 inch (1219 mm) width |
|
PTFE Glass Cloth |
Silicone | SG25-3 | SG25-5 | SG25-10 | 600°F (310°C) |
Primary mold release tapes | |
PTFE Glass Cloth |
Silicone | SG35-6 | 600°F (310°C) |
Textured surface finish | |||
Skived PTFE |
Silicone | 2045-5 | 600°F (310°C) |
Widest available product in the market at 48 inch (1219 mm) width |
Backing Material | Adhesive | .050 mm | .075 mm | Short Term Temp. Rating (1-5 hours)°F (°C) | Product Features |
Extruded PTFE | Silicone | 2285, 2296, 2275 |
600°F (310°C) |
Bright colors: 2285-2 orange, 2296-2 yellow, 2275-2 dark orange | |
High Modulus |
Rubber | 2250-2 | 400°F (200°C) |
Non-silicone, clean removal | |
High Modulus |
Silicone | 2255-2 | 600°F (310°C) |
Dimensionally stable, low twisting and curling | |
Skived PTFE |
Silicone | 2045-3 | 600°F (310°C) |
Widest available product in the market at 48 inch (1219 mm) width |
|
FEP & ETFE |
Silicone | 2355, 2455 |
400°F (200°C) |
High conformability |
极速飞艇开奖结果助手
K201
CHR K201 is manufactured from a special grade polyimide backing material with a high-temperature silicone pressure-sensitive...
M887
CHR M-Series (2.0 Mil PET/Silicone Adhesive) is manufactured from polyester film with silicone pressure-sensitive adhesive. M887...
2255
CHR 2255 is manufactured from modified high-modulus PTFE film coated with high-temperature silicone adhesive. The most outstanding...
SGB6
CHR SGB6 is a brown fiberglass fabric impregnated with Polytetrafluoroethylene (PTFE) dispersion and coated with a high...
SG35
SG35 is an industrial grade fiberglass fabric impregnated with Polytetrafluoroethylene (PTFE) dispersion and coated with a high...